Press Release

2011-04-27

IGBT module tops the competition in current density

4.9 A/cm² for 3-level inverters

 

 

For solar inverters and UPS systems of up to 85 kVA

 

Nuremberg, 27 April 2011 - Semikron presents its newest MiniSKiiP IGBT power semiconductor module, which is now also available in 3-level topology. The new module boasts a rated current of 4.9 A/cm², the highest rated current per unit of area in comparison to competitor products, and one phase leg per module, enabling the development of compact inverters with output power of up to 85 kVA. The MiniSKiiP is characterised by the fast and easy single-screw assembly and therefore optimised for the efficient manufacture of 3-level solar inverters and UPS systems.

 

The rated current per unit of area is up to twice that of other 3-level modules. Since no solid busbars are needed between the three phases/modules, more compact inverters can be made. The reverse voltage of the IGBTs and diodes used has been increased to 650 V to enable DC link voltages of 900 V for 480 V three-phase power applications typical in commercial or industrial settings in the United States. Each module has a 3-level phase leg with sufficient space for ten power semiconductors each.

 

Across the world, more than 15 million MiniSKiiP modules are in use in drives and frequency converters. The success of this module platform continues in the new 3-level topology, which improves electrical efficiency and makes power converters more efficient. Thermal and electrical connection between the module and the heat sink and the driver board is established with a single screw or two screws for rated module currents of up to 150 A or 200 A, respectively. This means that solder equipment and time-consuming soldering processes are done away with in the assembly stage. For solar inverter output power of 60 kVA and above, i.e. for rated current of  150 A and higher, modules with screw connections were previously used for the busbars. Thanks to MiniSKiiP
200 A 3-level modules, the busbars can be replaced with cheaper PCBs in inverters with outputs of up to 85 kVA. Former complex 8-screw connections have been reduced to simple 2-screw-assembly solutions.

 

“Owing to the efficiency gain, 3-level technology is set to become standard in solar inverters and UPS systems in the very near future,” comments Thomas Grasshoff, Head of International Product Management, referring to the trends on these markets. In the drives sector, MiniSKiiP modules have already gained a strong footing thanks to their fast and easy assembly.

 

The 3-level product range from Semikron covers rated currents of 20 A to 600 A: featuring SEMITOP solder modules for up to 150 A, MiniSKiiP spring contact modules for up to 200 A and SKiM screw connection modules for up to 600 A.

 

Figure: The new MiniSKiiP IGBT power semiconductor module – now also available in 3-level topology. The new module boasts a rated current of 4.9 A/cm², beating the rated currents per unit of area of any competitor product.

 

 

 

About SEMIKRON:

Semikron is an internationally leading power semiconductor manufacturer. 2011 marks the 60th anniversary of the German-based family enterprise which employs 3600 people worldwide. A global network of 35 companies with production plants in Brazil, China, France, Germany, India, Italy, Korea, Slovakia, South Africa and USA guarantees fast and competent on-site customer care.

 

Semikron is a one-stop provider of chips, discrete semiconductors, transistor, diode and thyristor power modules, power assemblies and systems for markets such as industrial drives, wind and solar, hybrid and electric vehicles, the rail industry and power supplies. Globally Semikron technology powers nearly every second windmill. According to a survey carried out by BTM Consult ApS, the total wind power capacity installed until 2009 was 122 Gigawatt. 57 Gigawatt comprises power semiconductors from Semikron.

 

The dedication to the hybrid and electric vehicle market is evident in the development and production of power semiconductors for this market but also the majority take-over of Compact Dynamics GmbH, a development specialist for innovative control systems, the joint venture with drivetek, a provider for application-specific control technology, and the take-over of VePOINT, developing and producing inverters, DC/DC converters and chargers.

 

Semikron is the market leader in the field of diode/thyristor semiconductor modules, enjoying a 30% share of the worldwide market. (Source: IMS Research „The global power semiconductor market 2010”)

 

www.semikron.com.

 

Press contact:
Annette Müller
Manager International Communications
SEMIKRON INTERNATIONAL GmbH
Sigmundstr. 200
90431 Nürnberg
Tel: +49-(0) 911-6559-158/ Fax: +49-(0) 911-6559-77158
annette.mueller@semikron.com

 

IGBT module tops the competition in current density

4.9 A/cm² for 3-level inverters

SEMISEL Thermal calculator & simulator
SEMISEL
I accept the license term